Message: outp=p6o.o  runtpe=p6r.r  mctal=p6m.m

Calibration of Neutron Detectors in a Bunker
c
c Beginning of Cell Cards
c
c Source
   1   5   -15.100   -50 22 -23     
c
c Shadow Cone
c  iron section
   5   3   -7.87   -60 3 -4
c  polyethylene section
   6   4   -0.94   -60 4 -5
c
c Air inside room
  10   2   -0.00120484   (60 3 -5 21 -24 31 -32):
                         (5 -6 21 -24 31 -32 75 76 ):
                         (2 -3 50 21 -24 22 -23):
                         (2 -3 21 -24 31 -22):
                         (2 -3 21 -24 23 -32)
c
c Bunker Wall
  20   1   -2.3   (1 -2 20 -25 30 -33):(6 -7 20 -25 30 -33):
                  (1 -7 20 -21 30 -33):(1 -7 24 -25 30 -33):
                  (1 -7 20 -25 30 -31):(1 -7 20 -25 32 -33)
c
c Tally Cells
c  50   2   -0.00120484   -75
c  51   2   -0.00120484   -76
c
c Outside world
  99   0          -1:7:-20:25:-30:33
c
c Phoney cells to do surface tallies with
 100   2   -0.00120484   -75 -40
 101   2   -0.00120484   -75  40
 102   2   -0.00120484   -76 -40
 103   2   -0.00120484   -76  40
c
c End of Cell Cards

c Beginning of Surface Cards
c
   1   px   -400    $ outside of bunker wall
   2   px   -350    $ inside of bunker wall
   3   px   45      $ front edge of iron
   4   px   65      $ back edge of iron; front edge of polyethylene
   5   px   95      $ back edge of polyethylene
   6   px   350     $ inside of bunker wall
   7   px   400     $ outside of bunker wall
c
  20   py   -400    $ outside of bunker wall
  21   py   -350    $ inside of bunker wall
  24   py   350     $ inside of bunker wall
  25   py   400     $ outside of bunker wall
c
  30   pz   -375    $ outside of bunker wall
  31   pz   -325    $ inside of bunker wall
  22   pz   -0.25   $ bottom of source cylinder
  23   pz   0.25    $ top of source cylinder
  32   pz    325    $ inside of bunker wall
  33   pz    375    $ outside of bunker wall
c
  40   pz    0      $ surface to cosine bin
  41   px  165    $ segment of 40 for position 1
  42   px  175    $ segment of 40 for position 1
  43   px  295    $ segment of 40 for position 2
  44   px  305    $ segment of 40 for position 2
  45   py   -5   $ segment of 40
  46   py    5   $ segment of 40
c  47   pz    1      $ to make a phoney cell
c
c source geometrically centered at 0,0,0
  50   cz   0.25
c
c tally spheres
  75   sx   170   5     $ sphere 170 cm from source with radius 5 cm
  76   sx   300   5     $ sphere 300 cm from source with radius 5 cm
c
c Shadow Cone
  60   kx   -15.0 2.16263e-2 +1
c
c End of Surface Cards

c Beginning of Data Cards
c
c  vol  5j  523.598  523.598  3j
c area  18j  0.628318  0.628318  1j
c
mode n
c
print
c prdmp 2j 1
c
nps 100000000
c
c Source Definition
c Cylinder source with radius 0.25 cm and height 0.5 cm
sdef  pos=0 0 0 axs=0 0 1 rad=d1 ext=d2 erg=d3 par 1
si1 0.25
sp1 -21 1
si2 0.25
sp2 -21 0
si3   0.000000414 0.0000010 0.000010 0.000050 0.00010 0.00020
      0.00040 0.00070 0.0010 0.0030 0.0060 0.010 0.020 0.040
      0.060 0.080 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50
      0.55 0.60 0.70 0.80 0.90 1 1.2 1.4 1.6 1.8 2.0 2.3 2.6
      3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0
      14.0 15.0 16.0
sp3   0 0.31e-9 1.11e-8 1.27e-7 2.76e-7 7.82e-7 2.21e-6 4.53e-6
      5.68e-6 5.51e-6 1.28e-4 2.30e-4 7.74e-4 2.17e-3 2.80e-3
      3.29e-3 3.68e-3 1.05e-2 1.21e-2 1.33e-2 1.42e-2 1.49e-2
      1.55e-2 1.60e-2 1.63e-2 1.66e-2 1.68e-2 3.38e-2 3.39e-2
      3.37e-2 3.33e-2 6.46e-2 6.12e-2 5.73e-2 5.31e-2 4.88e-2
      6.55e-2 5.67e-2 6.33e-2 6.21e-2 4.68e-2 3.49e-2 2.58e-2
      3.30e-2 1.74e-2 9.01e-3 4.61e-3 2.33e-3 1.17e-3 5.83e-4
      2.88e-4 1.42e-4 6.94e-5 0
c
c Cell Importances
c
imp:n 1 3r 1 0 1 1 1 1
c imp:p 1 5r 1 0 1 
c
c Tallies
c
c Point Detectors
c point detector with cosine bins did not work
c
  fc5  point detector at position 1: 170,0,0 with exclusion radius 0
   f5:n   170  0  0     0
   e5   0.000000414 0.0000010 0.000010 0.000050 0.00010 0.00020
      0.00040 0.00070 0.0010 0.0030 0.0060 0.010 0.020 0.040
      0.060 0.080 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50
      0.55 0.60 0.70 0.80 0.90 1 1.2 1.4 1.6 1.8 2.0 2.3 2.6
      3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0
      14.0 15.0 16.0
c
 fc15  point detector at position 2: 300,0,0 with exclusion radius 0 
  f15:n   300  0  0     0
  e15   0.000000414 0.0000010 0.000010 0.000050 0.00010 0.00020
      0.00040 0.00070 0.0010 0.0030 0.0060 0.010 0.020 0.040
      0.060 0.080 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50
      0.55 0.60 0.70 0.80 0.90 1 1.2 1.4 1.6 1.8 2.0 2.3 2.6
      3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0
      14.0 15.0 16.0
c
c Spherical detectors to compare with point detectors
c cosine bins will not work with this either
c
   fc4  Spherical detector at position 1: 170,0,0
   f4:n   (100 101)
   e4   0.000000414 0.0000010 0.000010 0.000050 0.00010 0.00020
      0.00040 0.00070 0.0010 0.0030 0.0060 0.010 0.020 0.040
      0.060 0.080 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50
      0.55 0.60 0.70 0.80 0.90 1 1.2 1.4 1.6 1.8 2.0 2.3 2.6
      3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0
      14.0 15.0 16.0
c
  fc14  Spherical detector at position2: 300,0,0
  f14:n   (102 103)
  e14   0.000000414 0.0000010 0.000010 0.000050 0.00010 0.00020
      0.00040 0.00070 0.0010 0.0030 0.0060 0.010 0.020 0.040
      0.060 0.080 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50
      0.55 0.60 0.70 0.80 0.90 1 1.2 1.4 1.6 1.8 2.0 2.3 2.6
      3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0
      14.0 15.0 16.0
c
  fc1  Planar surfaces for cosine binning
       position 1: 170,0,0 is the 5th bin
       position 2: 300,0,0 is the 7th bin
  f1:n   40
c  fs1  -45 46 -41 44 -42 -43         $ old surface segment
  fs1  -75
c  sd1   1 1 1 1 100  1  100          $ for old surface segment
  sd1  62.8318 1
  e1   0.000000414 0.0000010 0.000010 0.000050 0.00010 0.00020
      0.00040 0.00070 0.0010 0.0030 0.0060 0.010 0.020 0.040
      0.060 0.080 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50
      0.55 0.60 0.70 0.80 0.90 1 1.2 1.4 1.6 1.8 2.0 2.3 2.6
      3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0
      14.0 15.0 16.0
  c1   -0.866  -0.5  0  0.5  0.866  1
c
  f11:n   40
c  fs1  -45 46 -41 44 -42 -43         $ old surface segment
  fs11  -76
c  sd1   1 1 1 1 100  1  100          $ for old surface segment
  sd11  62.8318 1
  e11   0.000000414 0.0000010 0.000010 0.000050 0.00010 0.00020
      0.00040 0.00070 0.0010 0.0030 0.0060 0.010 0.020 0.040
      0.060 0.080 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50
      0.55 0.60 0.70 0.80 0.90 1 1.2 1.4 1.6 1.8 2.0 2.3 2.6
      3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0
      14.0 15.0 16.0
  c11   -0.866  -0.5  0  0.5  0.866  1
c
c Beginning of Material Data Cards
c
c Concrete
c rho = 2.3 g/cc
m1    001001 0.11698245   001002 0.00001755
      008016 0.60796842   008017 0.000231579
      014028 0.25344804   014029 0.01283316   014030 0.0085188
c
c Air
c rho = 0.00120484 g/cc
m2    006012 -0.00012521867138   006013 -0.00000140552862
      007014 -0.762280494675   007015 -0.0028001953254
      008016 -0.23470328576   008017 -0.000089400020638
c
c Iron
c rho = 7.87 g/cc
m3    026054 0.05845   026056 0.91754   026057 0.02119   026058 0.00282
c
c Polyethylene
c rho = 0.94 g/cc
m4    006012 0.9889   006013 0.0111
      001001 1.9997   001002 0.0003
c
c Californium 252
c rho = 15.100
m5    098252 1


                
